Vesa 400 x 200 adaptor plate for medium sized flat panel TV mounts. Suits (VM400, MF110, VM300 and VM200). Now also supports 300 x 200 VESA
Available in Black only

The VisionMount SSMK1 is a hardware kit that allows steel wall stud mounting for Sanus VMPL, VMPL2, VMPL3, VMPL50 and VMPL250 flat-panel TV mounts. This kit increases the mounting options of these universal wall mounts for use in commercial applications such as office buildings, warehouses or condominiums. UL listed. Holds up to 175 lbs
Available in Black only

The MA4A adapter allows VESA 200 x 200-compatible mounting plates to support TVs with VESA 400 x 300, 400 x 200, 300 x 300, 300 x 200 or 300 x 100 hole patterns. The MA4A attaches easily to Sanus MF110 and VM400 wall mounts, as well as any mount with a Virtual Axis 3D™ interface.

VisionMount VMB1 extra-large plasma TV adapter bracket for Sanus VMPL and VMPL2 flat-panel TV wall mounts. This adapter allows Sanus VMPL and VMPL2 flat-panel TV wall mounts to support the unique mounting patterns of some extra-largeTVs, such as the 154.94 (61") NEC and other plasma TVs.
Available in Black only

Concrete ceiling adaptor, VMCA1B-01 5" ceiling plate is a cost effective solution for simple installations. Easy to install and so versatile it can hold equipment using all 4 holes or 2 opposing holes. The 4" x 4" mounting pattern is designed to allow use of 3/8" mounting bolts. Includes set screw to secure 1 1/2" NPT to ceiling plate. Weight Capacity: 227kg. Not to be used in wood slides
Available in Black only

I-Beam adaptor, VMCA2B-01 adapts 1 1/2" threaded extension column to square, round, rectangular, or I-beam truss up to 3" in diameter. Weight capacity: 113.6kg.

Available in Black only

Unistrut adaptor, VMCA3B-01 offset unistrut adaptor makes installation to all styles of 1 5/8" Unistrut / U-Channel simple. Designed with a 1 1/2" cable management gap, it offers the ability to run cable up through the pole and directly out of the unistrut adaptor. Installation is quick and it ships with spring nuts and bolts for attaching to Unistrut / U-Channel. Weight Capacity: 227.3 kg
Available in Black only

Dual - Joist Adaptor, VMCA4B-01 16" on centre ceiling plate can be attached to finished ceiling using the included lag bolts (16" on-centre joists use the CMA-390, 24" on-centre joists use the CMA-391). The CMA-390 can also be used on structural ceilings using concrete anchors (CMA-380). Unit has threaded fitting to accept 1 1/2" NPT threaded extension column. Set screw is included. Weight capacity: 136.4kg.
Available in Black only

Vaulted ceiling adaptor, VMCA5B-01 angled ceiling adaptor adjusts from -5 degrees to +95 degrees to level an angled ceiling. Accepts 1 1/2" NPT threaded extension column. Three slotted mounting holes allow horizontal and vertical adjustment for a precise installation. Includes set screw. Dimensions: 4 1/4" H x 3" W x 7 1/2" L 107.9mm H x 76.2mm W x 190.5mm L. Weight capacity: 227.3kg.
Available in Black only

NPT column adaptor, VMCA6S-01 1" - 1 1/2" NPT Adaptor/Reducer. Easily adapt your RPA Mount or other 1 1/2" NPT accessory for use with a NPT column.
Available in Silver only

Ceiling adaptor plate 8" x 8" - 1 1/2" NPT fitting. It combines with an extension column or our adjustable extension column, allowing you to size your installation. Includes set screw. Also available for attaching to 2" NPT column. Weight capacity: 227.3kg.
Available in Black only

Ceiling adaptor plate 6" x 6" - 1 1/2" NPT fitting. It combines with an extension column or our adjustable extension column, allowing you to customise your installation. Includes set screw. Also available for attaching to 2" NPT column. Weight capacity: 227.3kg.
Available in Black only

Offset fixed ceiling plate use with 1 1/2" NPT it allows projector cables to be routed through the extension column and out the top of the ceiling plate for cable management. 8" square ceiling plate with 1 3/4" high offset. Overall height is 4 1/2". Attaches to 1 1/2" NPT threaded extension column. Also available for attaching to 2" NPT Column. Weight capacity: 227.3kg.
Available in Black only

Adjustable extension columns can be used with any 1 1/2" NPT accessory to lower projector to desired height. Provides range of height adjustment in approx 2.5cm increments depending on model. Includes set screw for added rigidity. Minimum length 60.96 - 91.44cm. Weight capacity: 227.3kg.
Available in Black only

The VisionMount VMpa2632 is an adapter that allows Sanus VM200, VM300 and VM400 flat-panel TV wall mounts to be used with Panasonic TC-26LX20, TC-26LX50, TC-32LX20 and TC-32LX50 TVs.
Available in Black only

VMPL3 adaptor plate for 65" (165cm) Panasonic plasma TVs.

Available in Silver

Adaptor plate for VMF, VM1, VM2, and VM3. VESA 100 to 200 mm.

Available in Silver only